You are viewing the official European distributor site of Takata Austria. Switch to Rest of World.
RACE SERIES
Takata RACE belts are manufactured by Takata Racing in Germany to the latest FIA standards. These 6 point belts feature 2" lap
belts, and either 3" shoulder belts, or 3" to 2" HANS® specific shoulder belts. The sub-strap uses Takata's compact T-Bar sub-
strap. Both snap-on and bolt-on options are offered for mounting. Versions of the RACE 6 belts with 3" lap belts are also available
with SFI certification.
Takata also offers 4 point RACE Series harnesses. Unique to these products is the feature of ASM® (anti submarining
mechanism) which is added to the right shoulder belt. ASM® activates whenever an impact of a critical level occurs releasing and
extra two inches of webbing on the right shoulder - allowing enough upper torso rotation and thus helping to reduce the likelihood
of submarining. In additional unique bendable stainless steel mount bracket for the lap belts allow for easy installation to factory
seat belt mounting points.
RACE 6
RACE 6 HANS
RACE 6 HANS SFI
RACE 6 SFI
FORMULA 6
FORMULA 6 HANS
RACE 4 BOLT
RACE 4 SNAP
The RACE 6 is the premium harness for your competition vehicle. This 6 point harness is FIA approved with T-
Bar sub-strap, 3" shoulder belts, 2" lap belts and the exclusive TAKATA aluminum multi-point release cam-lock
buckle.
The lap belts come with pull-down adjusters (pull away from the cam-lock) and Snap-On brackets for mounting
to an eyebolt. The sub-straps are mounted with Snap-On brackets as well. The Snap-On brackets on both the
lap belt and sub-straps are wrapped in allowing you to properly set the lengths of the belts and/or to change to
a Bolt-On configuration by purchasing an additional Bolt-On kit.
Shoulder belts come with a 3-bar adjuster for wrap mounting to a rollbar or harnessbar. Snap-On or Bolt-On
brackets can be purchased separately if you prefer a snap or bolt mount for the shoulder belts.
Takata Quality – made by Takata Racing (Europe) in Germany
Specifications:
FIA approved 6 point racing belt
3" shoulder belts, 2" Pull Down Lap belt
Central Camlock
Dual T-bar style anti-sub strap
Optional Bolt-in kits available for conversion
Available colors: black, green
The RACE 6 HANS is the same as the RACE 6 but with 3" to 2" shoulder belts that are compatible with the
HANS® device and other head and neck restraints. The lower section of the shoulder belt, including the
adjuster, is 3" while the upper section of the shoulder belt, where it passes over the head and neck restraint, is
2" fitting perfectly on the friction surface of your HANS® device. Standard 3" shoulder belts will work with
HANS®, but the 2"/3" belts give you a better fit and allow you to optimize the installation angles behind the seat.
There is no difference in the strength of the 2" webbing compared to the 3" webbing.
Takata Quality – made by Takata Racing (Europe) in Germany
Specifications:
FIA Approved 6-point racing belt
2"/3" HANS® specific shoulder belts, 2" Pull Down Lap belt
Central Camlock
Dual T-bar style anti-sub strap
Optional Bolt-in kits available for conversion
Available colors: black, green
The RACE 6 SFI is the premium harness for your competition vehicle if you require SFI certification or if you
prefer 3" lap belts. This 6 point harness is both FIA and SFI 16.1 certified with T-Bar sub-strap, 3" shoulder belts,
3" lap belts and the exclusive TAKATA aluminum multi-point release cam-lock buckle.
The lap belts come with pull-down adjusters (pull away from the cam-lock) and Snap-On brackets for mounting
to an eyebolt. The sub-straps are mounted with Snap-On brackets as well. The Snap-On brackets on both the
lap belt and sub-straps are wrapped in allowing you to properly set the lengths of the belts and/or to change to a
Bolt-On configuration by purchasing an additional Bolt-On kit.
Shoulder belts come with a 3-bar adjuster for wrap mounting to a rollbar or harnessbar. Snap-On or Bolt-On
brackets can be purchased separately if you prefer a snap or bolt mount for the shoulder belts.
Takata Quality – made by Takata Racing (Europe) in Germany
Specifications:
FIA and SFI 16.1 approved 6 point racing belt
3" shoulder belts, 3" Pull Down Lap belt
Central Camlock
Dual T-bar style anti-sub strap
Available in Black or Green
Optional Bolt-in kits available for conversion
Available colors: black, green
The RACE 6 HANS SFI is the same as the RACE 6 but with 3" to 2" shoulder belts that are compatible with the
HANS® device and other head and neck restraints. The lower section of the shoulder belt, including the
adjuster, is 3" while the upper section of the shoulder belt, where it passes over the head and neck restraint, is
2" fitting perfectly on the friction surface of your HANS® device. Standard 3" shoulder belts will work with
HANS®, but the 2"/3" belts give you a better fit and allow you to optimize the installation angles behind the seat.
There is no difference in either the strength or elongation of the 2" webbing compared to the 3" webbing.
The SFI 16.1 standard provides for 2" webbing on the upper shoulder belt to be used with a head and neck
restraint. You should check with your sanctioning organization to see if they have any rules or regulations that
may require 3" shoulder belts.
Takata Quality – made by Takata Racing (Europe) in Germany
Specifications:
SFI and FIA approved 6 point racing belt
2"/3" HANS® specific shoulder belts, 3" Pull Down Lap belt
Central Camlock
Dual T-bar style anti-sub strap
Optional Bolt-in kits available for conversion
Available colors: black, green
The FORMULA 6 is a 6 point FIA approved harness for reclined or space limited seating positions as found in
various formula cars, prototypes and kit cars. The routing of the crotch belts is through D-Rings on the lap belts
so there is no hardware between the legs of the driver in the small confines of the cockpit.
The FORMULA 6 features the exclusive TAKATA aluminum multi-point release cam-lock buckle, 3" shoulder
belts, 2" lap belts and 2" crotch belts. The lap and crotch belts are supplied with wrap-in bolt on hardware which
can also be removed for installation with pinch-plates as found in many formula type cars. The shoulder belts
are provided with sewn in bolt on brackets with a 5/16" (8mm) mounting hole.
Takata Quality – made by Takata Racing (Europe) in Germany
Specifications:
6 point racing belt for formula cars
3" Shoulderbelts with 2" lap belts
FIA Homologation
Bolt in hardware
Available colors: black, green
The FORMULA 6 HANS is a 6 point FIA approved harness for reclined or space limited seating positions as
found in various formula cars, prototypes and kit cars. The routing of the crotch belts is through D-Rings on the
lap belts so there is no hardware between the legs of the driver in the small confines of the cockpit.
The FORMULA 6 features an aluminum multi-point release cam-lock buckle, 2"/3" HANS® shoulder belts, 2" lap
belts and 2" crotch belts. The HANS® specific 2"/3" shoulder belts are designed to make HANS® use safer and
more comfortable. The upper part of the shoulder belt is 2" wide, fitting perfectly on the friction surface of your
HANS® device. Standard 3" shoulder belts will work with HANS®, but the 2"/3" belts give you a better fit and
allow you to optimize the installation angles behind the seat.
The lap and crotch belts are supplied with wrap-in bolt on hardware which can also be removed for installation
with pinch-plates as found in many formula type cars. The 2" shoulder belts have wrapped in bolt-on brackets,
that can be removed, to allow the shoulder belts to be wrapped around a tube or bar.
Takata Quality – made by Takata Racing (Europe) in Germany
Specifications:
6 point racing belt for formula cars
HANS® Specific 2"/3" Shoulder belts with 2" lap belts
FIA Homologation
Bolt in hardware
Available colors: black, green
The RACE 4 is the benchmark harness for Track Day/Drift/Show cars. This true racing harness comes with FIA
approval, and the exclusive TAKATA aluminum multi-point release cam-lock buckle. Additional features include
asmTM system to prevent submarining, 3" shoulder belts, and 2" lap belts.
The Bolt-On version features specialized bendable stainless steel bolt-on brackets (see image) designed to bolt
to the stock vehicle seat belt mounting points along with your factory seat belts. The brackets can be pre-bent to
optimize installation and to maintain the proper load path of the seat belt under load.
The lap belt Bolt-On attachment brackets are sewn into the lap belts. The shoulder belt attachment brackets are
wrapped in and can be removed allowing you to wrap the shoulder belts to a harnessbar or rollbar using the 3-
bar adjusters provided.
Takata Quality – made by Takata Racing (Europe) in Germany
Specifications:
4-point belt Racing-oriented belt
ASMTM (Anti-Submarining) Technology
3" Shoulder belt, 2" Lap (Pull Up)
Central Camlock
Option for added Anti-Sub Strap (creating a 6-point belt)
Available colors: black, green
The RACE 4 is the benchmark harness for Track Day/Drift/Show cars. This true racing harness comes with FIA
approval, and the exclusive TAKATA aluminum multi-point release cam-lock buckle. Additional features include
asmTM system to prevent submarining, 3" shoulder belts, and 2" lap belts with Pull-up adjusters.
The lap belt Snap-On attachment brackets are sewn into the lap belts. The shoulder belt attachment brackets
are wrapped in and can be removed allowing you to wrap the shoulder belts to a harnessbar or rollbar using the
3-bar adjusters provided.
Takata Quality – made by Takata Racing (Europe) in Germany
Specifications:
4-point belt Racing-oriented belt
ASMTM (Anti-Submarining) Technology
3" Shoulder belt, 2" Lap (Pull Up)
Central Camlock
Option for added Anti-Sub Strap (creating a 6-point belt)
Available colors: black, green