You are viewing the official European distributor site of Takata Austria. Switch to Rest of World.
DRIFT SERIES
The Takata DRIFT Series of belts, manufactured by Takata Racing in Germany, are uniquely designed for safe installation in
passenger cars with factory seats.
The belts meet both FMVSS (US) & ECE (European) standards for "Street Legal" use.
Both belts incorporate Takata ASM® technology and bendable stainless steel mounting hardware allowing installation to factory
seat belt mounting points without effecting the operation of factory seat belts. Takata DRIFT belts set new standard style and
safety of aftermarket, Street Legal belts. DRIFT belts come in both Takata Green and Black to match any interior scheme with
style!
DRIFT II BOLT
Takata Racing cult status for the street! Available in traditional TAKATA Green and also in Black!
This belt manufactured in accordance to the European Standard ECE-R 16.04 and Federal Motor Vehicle
Safety Standard (FMVSS) 209. It is a legal seat belt for use in street cars in all US states with mandatory seat
belt laws. The belt features a center push button release buckle and our shoulder belt asmTM system to
prevent submarining. 2" shoulder belts and 2" lap belts with comfort padding.
The Bolt-On version generally bolts to the existing factory mounting points for the front lap belts. The shoulder
belts generally mount either to the rear "D" and "E" lap belt mounting points OR they can be wrapped directly to
a roll-cage or harness bar.
The lap belt Bolt-On attachments brackets are sewn into the lap belts. The shoulder belt attachment brackets
can be removed allowing you to wrap the shoulder belts to a harnessbar or rollbar using the 3-bar adjusters
provided.
(DRIFT belts should only be used with seats that have a "pass-through" for the shoulder harnesses such as a
stock seat with an adjustable up and down headrest or a race type seat with openings for the shoulder belts.
Never use this type of belt with a seat that has an integrated head rest that would require the shoulder
belts to be routed around the outside of the headrest. The rear passenger seats must not be used while
the DRIFT belt is installed.)
Takata Quality – made by Takata Racing (Europe) in Germany
Specifications:
Street Oriented 4 point harness
2" Shoulders, 2" Lap belts
Bolt-in hardware
ECE certified
Street legal
Available colors: black, green
Mounting Location Diagram
DRIFT II SNAP
Takata Racing cult status for the street! Available in traditional TAKATA Green and also in Black!
This belt manufactured in accordance to the European Standard ECE-R 16.04 and Federal Motor Vehicle
Safety Standard (FMVSS) 209. It is a legal seat belt for use in street cars in all US states with mandatory seat
belt laws. The belt features a center push button release buckle and our shoulder belt asmTM system to prevent
submarining. 2" shoulder belts and 2" lap belts with Pull-up adjusters with comfort padding.
The lap belt Snap-On attachments brackets are sewn into the lap belts. The shoulder belt attachment brackets
can be removed allowing you to wrap the shoulder belts to a harnessbar or rollbar using the 3-bar adjusters
provided. The Snap-On version is designed to be attached to eye bolts at the lap belts.
(DRIFT belts should only be used with seats that have a "pass-through" for the shoulder harnesses such as a
stock seat with an adjustable up and down headrest or a race type seat with openings for the shoulder belts.
Never use this type of belt with a seat that has an integrated head rest that would require the shoulder
belts to be routed around the outside of the headrest. The rear passenger seats must not be used while
the DRIFT belt is installed.)
Takata Quality – made by Takata Racing (Europe) in Germany
Specifications:
Street Oriented 4 point harness
2" Shoulders, 2" Lap belts with Pull-up adjusters
Snap-on hardware
ECE certified
Street legal
Available colors: black, green
Mounting Location Diagram
DRIFT III BOLT
If you want the look and feel of a full racing harness, but still need to stay "Street Legal", the DRIFT III is the belt
you need with its 3" wide racing shoulder belts.
This belt manufactured in accordance to the European Standard ECE-R 16.04 and Federal Motor Vehicle Safety
Standard (FMVSS) 209. It is a legal seat belt for use in street cars in all US states with mandatory seat belt laws.
The belt features a center push button release buckle and our shoulder belt asmTM system to prevent
submarining. 3" shoulder belts and 2" lap belts with comfort padding.
The Bolt-On version generally bolts to the existing factory mounting points for the front lap belts. The shoulder
belts generally mount either to the rear "D" and "E" lap belt mounting points. Please see attached diagram for
explanation of these locations.
The lap belt Bolt-On attachments brackets are sewn into the lap belts. The shoulder belt attachment brackets
can be removed allowing you to wrap the shoulder belts to a harnessbar or rollbar using the 3-bar adjusters
provided. Belts are available with or without shoulder end fittings.
Please Note: (DRIFT belts should only be used with seats that have a "pass-through" for the shoulder harnesses
such as a stock seat with an adjustable up and down headrest or a race type seat with openings for the shoulder
belts. Never use this type of belt with a seat that has an integrated head rest that would require the
shoulder belts to be routed around the outside of the headrest. The rear passenger seats must not be
used while the DRIFT belt is installed.)
Takata Quality – made by Takata Racing (Europe) in Germany
Specifications:
Street Oriented 4 point harness
3" Shoulders, 2" Lap belts with Pull-down adjusters
Bolt-in hardware
ECE certified
Street legal
Available colors: black, green
Mounting Location Diagram
DRIFT III SNAP
IIf you want the look and feel of a full racing harness, but still need to stay "Street Legal", the DRIFT III is the
belt you need with its 3" wide racing shoulder belts.
This belt manufactured in accordance to the European Standard ECE-R 16.04 and Federal Motor Vehicle
Safety Standard (FMVSS) 209. It is a legal seat belt for use in street cars in all US states with mandatory seat
belt laws. The belt features a center push button release buckle and our shoulder belt asmTM system to prevent
submarining. 3" shoulder belts and 2" lap belts with comfort padding.
The lap belt Snap-On attachments brackets are sewn into the lap belts. The shoulder belt attachment brackets
can be removed allowing you to wrap the shoulder belts to a harnessbar or rollbar using the 3-bar adjusters
provided. Belts are available with or without shoulder end fittings.
Please Note: (DRIFT belts should only be used with seats that have a "pass-through" for the shoulder
harnesses such as a stock seat with an adjustable up and down headrest or a race type seat with openings for
the shoulder belts. Never use this type of belt with a seat that has an integrated head rest that would
require the shoulder belts to be routed around the outside of the headrest. The rear passenger seats
must not be used while the DRIFT belt is installed.)
Takata Quality – made by Takata Racing (Europe) in Germany
Specifications:
Street Oriented 4 point harness
3" Shoulders, 2" Lap belts with Pull-down adjusters
Snap-on hardware
ECE certified
Street legal
Available colors: black, green
Mounting Location Diagram