Ihr Warenkorb
keine Produkte

HKS Hipermax S-style X - Toyota CROWN AWS210 GRS214 GRS210 12/2012 - 80120-AT206

Art.Nr.:
80120-AT206
Lieferzeit:
Sonderbestellung Sonderbestellung (Ausland abweichend)
    2.099,00 EUR
    inkl. 20% MwSt. zzgl. Versand

    The vehicle height data is of GRS214 (3.5L).
    The factory setting for case length and winding measuments set for GRS204.
    Before driving public road, adjust the fog light's lower edge height to be more than 250mm.

     
    CROWN AWS210 GRS214 GRS214  
    S-Style X Code No. 80120-AT206
     
     
     

    ▲The above photo is an item for GRS204.

    "Not just for lowering the vehicle height." "Super Low Stance Model" for reliable driving performance.

     
    Application   Specification
    Engine AWS210: 2AR-FSE(2AR-1KM)
    GRS210: 4GR-FSE
    GRS214: 2GR-FSE
    Model Year 12/12 - 
    Remarks The vehicle height data is of GRS214 (3.5L).
    The factory setting for case length and winding measuments set for GRS204.
    Before driving public road, adjust the fog light's lower edge height to be more than 250mm.
     
      FRONT REAR
    Damping force adjustment 30 steps 30 steps
    Base valve - -
    Height adjustable lower bracket
    Upper mount Spherical bearing Spherical bearing
    Inverted/Normal type Normal Normal
    Damper/Spring layout Coilover Coilover
    Spring rate change at factory Possible Possible
    Damping force adjustment with wire -
    Helper spring
    (Spring rate N/mm)
    - -
     
    Ride Height mm
      Factory *2 Test data Adjustable range
    High - Low *3
    Drivable range
    High - Low *4
    FRONT Ride height *1 - 650 696 ~ 579 692 ~ 646
    Against stock - -46 0 ~ -117※5 -4 ~ -50
    REAR Ride height *1 - 604 686 ~ 538 664 ~ 583
    Against stock - -82 0 ~ -148※5 -22 ~ -103
    *1. Height from road surface to fender arch.
    *2. Height at factory is the data tested at HKS with the setting of Full Kit. (HKS' recommended setting.)
    *3. Adjustable range (However, the lowest value may not be road legal.
    Even within the adjustable range, car body, arm etc. may contact. In such case, it will be hard to drive.
    Damper oil leakage or any other problems caused by low ride height setting from the factory setting will void the warranty of the product.)
    *4. Drivable range that there is no contact of car body or arms etc. (However, change of tire/wheel size may cause a problem.)
    Caution). Actual data depends on each vehicle.
     
    Kit information
    Spring of Full Kit
      F R
    Spring rate N/mm(kgf/mm) 176 ( 18 ) 157 ( 16 )
    Free height (mm) 150 170
    Spring type Straight Straight
    Recommended range to change spring rate N/mm(kgf/mm) +20 ( 2 ) -
    Specification of damper
      F R
    Damping force (Rebound/Damping)N* 1846 / 940 1775 / 814
    Default position of dial 20 20
    Remaining damper stroke (Rebound/Damping)mm 30 / 42 30 / 42
    * The value of the damping force is at piston speed of 0.1m/sec.
    Setting data
      F R
    Default Test Drivable limit
    High *
    Drivable limit
    Low *
    Default Test Drivable limit
    High *
    Drivable limit
    Low *
    Length of
    case (mm)
    408 408 426 405 396 382 412 368
    Spring
    Set length(mm)
    146 150 140 150 166 170 160 170
    Length to ride hight
    adjuster (mm)
    122 118 146 115 90 72 112 58
    Lever ratio 1.49 1.51
    * Refer to the above explanation *3 of ride height information for drivable high and low limitations.
     
    Test vehicle information
      F R
    Vehicle weight kg 883 755
    Tire size (Air pressure) kPa 245 / 35 - 19 ( 240 ) 275 / 30 - 19 ( 240 )
    Wheel size 8.5 JJ × 19 off 45 9.5 JJ × 19 off 45
    Alignment
    (Toe/Camber)
    Test data 0 mm / -1°15' in 3 mm / -2°00'
    Standard value - -
    * Test data at HKS.
     
    Parts List * It may be changed without prior notice.

     
    Point
    ・Ultimate low-down suspension that used movable limit level of the arm. This kit is for dress-up user who wants a serious low-down.
    ・The damping force and spring rate are a little firm setting to prevent the interfere of the aero and the road at a high rolling and to compensate for uncomfortable ride because of more weight with big wheels.
    ・If the case length for both front and rear are set lower than the driving limit level, the upper arm and body might interfere with each other.
    ・It will be 250mm for fog lower edge height if install the GRS214 of factory setting. Please reset to more than 250mm height if used in the street.
     
    *5 Might need modification of fender depending on the tire or wheel size.
     
    ●About installation modification
    ・Need to cut some part of the inner fender if spring interferes.