Ihr Warenkorb
keine Produkte

HKS Hipermax S-style X - Nissan SERENA (C)C25 05/2005-10/2010 - 80120-AN202

Art.Nr.:
80120-AN202
Lieferzeit:
Sonderbestellung Sonderbestellung (Ausland abweichend)
    2.099,00 EUR
    inkl. 20% MwSt. zzgl. Versand

    SERENA (C)C25  
    S-Style X Code No. 80120-AN202
     
     
     

    ▲The above photo is an item for HFC26.

    "Not just for lowering the vehicle height." "Super Low Stance Model" for reliable driving performance.

     
    Application   Specification
    Engine MR20DE
    Model Year 05/05 - 10/10
    Remarks *Please set within 3 steps to the negative of the factory setting for the front chamber adjustment.
    2WD, Rear:Separate type.
     
      FRONT REAR
    Damping force adjustment 30 steps 30 steps
    Base valve - -
    Height adjustable lower bracket
    Upper mount Spherical bearing Stock
    Inverted/Normal type Inverted Normal
    Damper/Spring layout Coilover Separated
    Spring rate change at factory Possible Impossible
    Damping force adjustment with wire - -
    Helper spring
    (Spring rate N/mm)
    ○ ( 4.7 ) -
     
    Ride Height mm
      Factory *2 Test data Adjustable range
    High - Low *3
    Drivable range
    High - Low *4
    FRONT Ride height *1 659 649 716 ~ 629 716 ~ 629
    Against stock -57 -67 0 ~ -87 0 ~ -87
    REAR Ride height *1 665 654 665 ~ 623 665 ~ 630
    Against stock -55 -66 -55 ~ -97 -55 ~ -90
    *1. Height from road surface to fender arch.
    *2. Height at factory is the data tested at HKS with the setting of Full Kit. (HKS' recommended setting.)
    *3. Adjustable range (However, the lowest value may not be road legal.
    Even within the adjustable range, car body, arm etc. may contact. In such case, it will be hard to drive.
    Damper oil leakage or any other problems caused by low ride height setting from the factory setting will void the warranty of the product.)
    *4. Drivable range that there is no contact of car body or arms etc. (However, change of tire/wheel size may cause a problem.)
    Caution). Actual data depends on each vehicle.
     
    Kit information
    Spring of Full Kit
      F R
    Spring rate N/mm(kgf/mm) 118 ( 12 ) 118 ( 12 )
    Free height (mm) 170 -
    Spring type Straight Special shape
    Recommended range to change spring rate N/mm(kgf/mm) ±20 ( 2 ) -
    Specification of damper
      F R
    Damping force (Rebound/Damping)N* 932 / 304 696 / 275
    Default position of dial 15 15
    Remaining damper stroke (Rebound/Damping)mm 52 / 35 34 / 62
    * The value of the damping force is at piston speed of 0.1m/sec.
    Setting data
      F R
    Default Test Drivable limit
    High *
    Drivable limit
    Low *
    Default Test Drivable limit
    High *
    Drivable limit
    Low *
    Length of
    case (mm)
    320 320 350 320 353 341 353 310
    Spring
    Set length(mm)
    204 214 178 234 - - - -
    Length to ride hight
    adjuster (mm)
    33 23 89 3 54 46 54 28
    Lever ratio 1.02 1.35(spg) , 0.90(dmp)
    * Refer to the above explanation *3 of ride height information for drivable high and low limitations.
     
    Test vehicle information
      F R
    Vehicle weight kg 942 746
    Tire size (Air pressure) kPa 215 / 45 - 18 ( 250 ) 215 / 45 - 18 ( 250 )
    Wheel size 7.5 JJ × 18 inset 48 7.5 JJ × 18 inset 48
    Alignment
    (Toe/Camber)
    Test data in 0 mm / -0°33' in 5.3 mm / -1°15'
    Standard value in 0.5~2.5 mm / -0°23' ± 45' out 0.2 ~ in 7.8 mm / -1°25' ± 30'
    * Test data at HKS.
     
    Parts List * It may be changed without prior notice.

     
    Point
    ・We have set the spring rate high compare to other vehicle's S-style X because it has smaller clearance between the tire and body so that it will have less vehicle movement.
    ・Adjustable chamber pillow upper is used for front upper mount.
    ・Please set within 3 steps to the negative of the factory setting for the front chamber adjustment. If you set it more than that it will interfere with brake hose bracket and brake tube and it will be very dangerous.
    ・You might feel the vibration depending on the vehicle's front height.
    ・It might interfere with the fender and the tire for rear case length of less than 336mm.
    ・Recommendation of tested dial setting: front:15, rear:15
    ・To not to interfere with tire in such as rear fender modification, the maximum rear case damper length is 326mm. Torsion beam and brake hose is the limit.