Ihr Warenkorb
keine Produkte

HKS Hipermax S-style C - Toyota ALLEX NZE121 ZZE122 ZZE123 01/2001-04/2004 - 80110-AT205

Art.Nr.:
80110-AT205
Lieferzeit:
Sonderbestellung Sonderbestellung (Ausland abweichend)
    1.499,00 EUR
    inkl. 20% MwSt. zzgl. Versand

    Height data is based on ZZE123G.
     
    ALLEX NZE121, ZZE122, ZZE123  
    S-style C 2018 Code No. 80110-AT205
     
     
     

    ▲The above photo is an item for ZZE123.

    Masterpiece of HKS "S-style" series! For the Best & Firm Ride!!

     
    Application   Specification
    Engine 1NZ-FE, 1ZZ-FE, 2ZZ-GE
    Model Year 01/01 - 04/04
    Remarks Height data is based on ZZE123G.
     
      FRONT REAR
    Damping force adjustment - -
    Base valve - -
    Height adjustable lower bracket
    Upper mount Rubber Stock
    Inverted/Normal type Inverted Normal
    Damper/Spring layout Coilover Coilover
    Spring rate change at factory Possible Possible
    Damping force adjustment with wire - -
    Helper spring
    (Spring rate N/mm)
    - ○(19.8)
     
    Ride Height mm
      Factory *2 Test data Adjustable range
    High - Low *3
    Drivable range
    High - Low *4
    FRONT Ride height *1 619 673 ~ 602 673 ~ 602
    Against stock -54 0 ~ -71 0 ~ -71
    REAR Ride height *1 629 676 ~ 611 676 ~ 611
    Against stock -53 -6 ~ -71 -6 ~ -71
    *1. Height from road surface to fender arch.
    *2. Height at factory is the data tested at HKS with the setting of Full Kit. (HKS' recommended setting.)
    *3. Adjustable range (However, the lowest value may not be road legal.
    Even within the adjustable range, car body, arm etc. may contact. In such case, it will be hard to drive.
    Damper oil leakage or any other problems caused by low ride height setting from the factory setting will void the warranty of the product.)
    *4. Drivable range that there is no contact of car body or arms etc. (However, change of tire/wheel size may cause a problem.)
    Caution). Actual data depends on each vehicle.
     
    Kit information
    Spring of Full Kit
      F R
    Spring rate N/mm(kgf/mm) 49 ( 5 ) 49 ( 5 )
    Free height (mm) 220 150
    Spring type Straight Barrel type Straight
    Recommended range to change spring rate N/mm(kgf/mm) ±10 ( 1 ) ±10 ( 1 )
    Specification of damper
      F R
    Damping force (Rebound/Damping)N* 520 / 230 300 / 160
    Default position of dial - -
    Remaining damper stroke (Rebound/Damping)mm 63 / 54 68 / 57
    * The value of the damping force is at piston speed of 0.1m/sec.
    Setting data
      F R
    Default Test Drivable limit
    High *
    Drivable limit
    Low *
    Default Test Drivable limit
    High *
    Drivable limit
    Low *
    Length of
    case (mm)
    302 346 286 310 320 289
    Spring
    Set length(mm)
    210 205 210 202 176 202
    Length to ride hight
    adjuster (mm)
    16 65 0 14 50 0
    Lever ratio 1.10 1.30
    * Refer to the above explanation *3 of ride height information for drivable high and low limitations.
     
    Test vehicle information
      F R
    Vehicle weight kg 699 418
    Tire size (Air pressure) kPa 205 / 45 - 17 ( 210 ) 205 / 45 - 17 ( 210 )
    Wheel size 7 JJ × 17 off 45 7 JJ × 17 off 45
    Alignment
    (Toe/Camber)
    Test data in 0mm / -0°30' in 2mm / -1°00'
    Standard value 0±2mm / -0°30'±30' in 2±2.5mm / -1°30'±30'
    * Test data at HKS.
     
    Parts List * It may be changed without prior notice.