Ihr Warenkorb
keine Produkte

HKS Hipermax S-style C - Nissan MARCH YK12 BK12 AK12 K12 02/2002-06/2010 - 80110-AN204

Art.Nr.:
80110-AN204
Lieferzeit:
Sonderbestellung Sonderbestellung (Ausland abweichend)
    1.459,00 EUR
    inkl. 20% MwSt. zzgl. Versand

    Rear: Separate type. Height data is based on AK12.
     
    MARCH YK12 BK12 AK12 K12  
    S-style C 2018 Code No. 80110-AN204
     
     
     

    ▲The above photo is an item for AK12.

    Masterpiece of HKS "S-style" series! For the Best & Firm Ride!!

     
    Application   Specification
    Engine YK12: HR15DE
    BK12: CR14DE
    AK12: CR12DE
    K12: CR10DE
    Model Year YK12: 05/08 - 10/06
    BK12: 02/02 - 05/07
    AK12: 02/02 - 10/06
    K12: 02/02 - 03/06
    Remarks Rear: Separate type. Height data is based on AK12.
     
      FRONT REAR
    Damping force adjustment - -
    Base valve - -
    Height adjustable lower bracket -
    Upper mount Rubber Stock
    Inverted/Normal type Inverted Normal
    Damper/Spring layout Coilover Separated
    Spring rate change at factory Possible Impossible
    Damping force adjustment with wire - -
    Helper spring
    (Spring rate N/mm)
    - -
     
    Ride Height mm
      Factory *2 Test data Adjustable range
    High - Low *3
    Drivable range
    High - Low *4
    FRONT Ride height *1 620 651 ~ 580 651 ~ 580
    Against stock -31 0 ~ -71 0 ~ -71
    REAR Ride height *1 611 629 ~ 585 629 ~ 585
    Against stock -45 -27 ~ -71 -27 ~ -71
    *1. Height from road surface to fender arch.
    *2. Height at factory is the data tested at HKS with the setting of Full Kit. (HKS' recommended setting.)
    *3. Adjustable range (However, the lowest value may not be road legal.
    Even within the adjustable range, car body, arm etc. may contact. In such case, it will be hard to drive.
    Damper oil leakage or any other problems caused by low ride height setting from the factory setting will void the warranty of the product.)
    *4. Drivable range that there is no contact of car body or arms etc. (However, change of tire/wheel size may cause a problem.)
    Caution). Actual data depends on each vehicle.
     
    Kit information
    Spring of Full Kit
      F R
    Spring rate N/mm(kgf/mm) 29 ( 3 ) 38 ( 3.9 )
    Free height (mm) 220 -
    Spring type Straight Barrel type Special shape
    Recommended range to change spring rate N/mm(kgf/mm) +20 ( 2 ) -
    Specification of damper
      F R
    Damping force (Rebound/Damping)N* 490 / 186 216 / 147
    Default position of dial - -
    Remaining damper stroke (Rebound/Damping)mm 43 / 61 57 / 88
    * The value of the damping force is at piston speed of 0.1m/sec.
    Setting data
      F R
    Default Test Drivable limit
    High *
    Drivable limit
    Low *
    Default Test Drivable limit
    High *
    Drivable limit
    Low *
    Length of
    case (mm)
    321 346 306 372
    Spring
    Set length(mm)
    180 175 203 - - - -
    Length to ride hight
    adjuster (mm)
    38 68 0 38 50 21
    Lever ratio 1.05 1.50(spg) , 1.00(dmp)
    * Refer to the above explanation *3 of ride height information for drivable high and low limitations.
     
    Test vehicle information
      F R
    Vehicle weight kg - -
    Tire size (Air pressure) kPa 165 / 70 - 14 ( 240 ) 165 / 70 - 14 ( 220 )
    Wheel size 5 JJ × 14 off 45 5 JJ × 14 off 45
    Alignment
    (Toe/Camber)
    Test data 0 mm / 0°18' in 5 mm / 1°00'
    Standard value in 2~0 mm / -0°10' ± 45' in 8~0 mm / -0°49' ± 45'
    * Test data at HKS.
     
    Parts List * It may be changed without prior notice.