Ihr Warenkorb
keine Produkte

HKS Hipermax S-style C - Mazda MPV LW3W 04/2002-01/2006 - 80110-AZ201

Art.Nr.:
80110-AZ201
Lieferzeit:
Sonderbestellung Sonderbestellung (Ausland abweichend)
    1.499,00 EUR
    inkl. 20% MwSt. zzgl. Versand

    2.3L FF REAR:Separate type. Compatible only with a vehicle with 265 stabilizer rod.
     
    MPV LW3W  
    S-style C 2018 Code No. 80110-AZ201
     
     
     

    ▲The above photo is an item for LW5W.
    Masterpiece of HKS "S-style" series! For the Best & Firm Ride!!
     
    Application   Specification
    Engine L3-DE(2.3L)
    Model Year 02/04 - 06/01
    Remarks 2.3L FF REAR:Separate type. Compatible only with a vehicle with 265 stabilizer rod.
     
      FRONT REAR
    Damping force adjustment - -
    Base valve - -
    Height adjustable lower bracket
    Upper mount Rubber -
    Inverted/Normal type Inverted Normal
    Damper/Spring layout Coilover Separated
    Spring rate change at factory Possible Impossible
    Damping force adjustment with wire - -
    Helper spring
    (Spring rate N/mm)
    - -
     
    Ride Height mm
      Factory *2 Test data Adjustable range
    High - Low *3
    Drivable range
    High - Low *4
    FRONT Ride height *1 679 731 ~ 630 731 ~ 652
    Against stock -52 0 ~ -101 -3 ~ -79
    REAR Ride height *1 691 706 ~ 651 706 ~ 651
    Against stock -37 -22 ~ -77 -22 ~ -77
    *1. Height from road surface to fender arch.
    *2. Height at factory is the data tested at HKS with the setting of Full Kit. (HKS' recommended setting.)
    *3. Adjustable range (However, the lowest value may not be road legal.
    Even within the adjustable range, car body, arm etc. may contact. In such case, it will be hard to drive.
    Damper oil leakage or any other problems caused by low ride height setting from the factory setting will void the warranty of the product.)
    *4. Drivable range that there is no contact of car body or arms etc. (However, change of tire/wheel size may cause a problem.)
    Caution). Actual data depends on each vehicle.
     
    Kit information
    Spring of Full Kit
      F R
    Spring rate N/mm(kgf/mm) 49 ( 5 ) 49 ( 5 )
    Free height (mm) 250 -
    Spring type Straight Barrel type Special shape
    Recommended range to change spring rate N/mm(kgf/mm) ±10 ( 1 ) -
    Specification of damper
      F R
    Damping force (Rebound/Damping)N* 515/184 1936/315
    Default position of dial - -
    Remaining damper stroke (Rebound/Damping)mm 63 / 64 54 / 48
    * The value of the damping force is at piston speed of 0.1m/sec.
    Setting data
      F R
    Default Test Drivable limit
    High *
    Drivable limit
    Low *
    Default Test Drivable limit
    High *
    Drivable limit
    Low *
    Length of
    case (mm)
    403 450 390 233 241 233
    Spring
    Set length(mm)
    240 240 253 - - -
    Length to ride hight
    adjuster (mm)
    68 115 42 44 49 55 15
    Lever ratio 1.04 1.37(spg) , 1.79(dmp)
    * Refer to the above explanation *3 of ride height information for drivable high and low limitations.
     
    Test vehicle information
      F R
    Vehicle weight kg 989 772
    Tire size (Air pressure) kPa 205 / 65 - 15 (240) 205 / 65 - 15 (240)
    Wheel size 6.0JJ × 15 off-- 6.0JJ × 15 off--
    Alignment
    (Toe/Camber)
    Test data in0mm / -1°40' in5mm / -1°30'
    Standard value in-±-mm / --°--′±--′ in-±-mm / --°--'±--′
    * Test data at HKS.
     
    Parts List * It may be changed without prior notice.

     
    Point
     
    ・When lowering the front vehicle height to the limit, secure the ABS harness with a tie wrap instead of a bolt so it won’t be pulled excessively.
     
    ●Required Modification
    The factory rear bump rubber must be cut and modified in order to install this product.